We are committed to providing you with perfect-looking models and low-volume parts.

Anodizing, spraying, vacuum plating, electrophoretic wire drawing, sandblasting, baking paint, powder spraying, electroplating, grinding, polishing, heat treatment, blackening, galvanizing, passivation, silk screen and other treatments are available, you can get whatever appearance you want.

Anodizing is an electrolytic process that deposits a chemically stable oxide layer on aluminum surfaces. The resulting oxide film is thicker and stronger than the native oxide coating of aluminum. It is hard, porous, and transparent, making it an integral part of metal surfaces so it will not peel or peel. Once deposited, the oxide film can be colored in a number of ways prior to sealing.

Strong texture: super strong metal texture: high-grade, beautiful and shiny;

Low specific gravity: the specific gravity is only one third of that of stainless steel;

Scratch resistance: the surface hardness reaches sapphire level;

Strong anti-fouling: no fingerprints are left after touching;

Antistatic: Antistatic does not vacuum and is easy to clean;

Good fire protection: environmentally friendly, non-toxic, completely fireproof;

Anti-ultraviolet: good weather resistance, anti-ultraviolet;

No fading: uniform color, no fading;

Strong hardness: special alloy series products

The surface of the board protected by UV treatment, UltraViolet, UV paint is UV curing paint, also known as photo-initiated paint.

High hardness. The highest hardness can reach 5-6H

Fast curing speed, high production efficiency, can be cured in 30 minutes by UV curing

Excellent coating performance, the coating has very high performance indicators in terms of hardness, wear resistance, acid and alkali resistance, salt spray resistance, gasoline resistance and other solvents, especially its full paint film and outstanding gloss

The light-curing process used in UV paint is pollution-free when spraying paint, and it is a recognized green and environmentally friendly product.

State-of-the-art temperature-controlled spray booths are capable of automatically air-drying workpieces and are suitable for making model parts and low-volume production parts for a variety of commercial uses. We use PPG automotive paint as the paint standard, and can also choose paint according to the specific requirements of customers.

In addition to adopting advanced technology to maintain the dust-free workshop in the painting area, we also pay attention to the exhaust pipe during the painting process to ensure that the exhaust gas is clean and environmentally friendly after a series of filtration.

Grinding can be divided into wet and dry. It is the preparation of surface treatment before painting. At the same time, it can display a special surface texture, which is an important part of the realization of the design. The surface can achieve a lock surface effect, and a small amount of fine abrasives can also be used to supplement the surface of the product to create semi-gloss and sleeping effects. The standard brushed effect is achieved by continuously grinding in the same direction. We use 3M's Baileys Pad and Alumina Sandpaper, we can also achieve other special finishes as specified by the customer.

Sandblasting uses compressed air as the power to form a high-speed jet beam to spray the spray material on the surface of the workpiece to be treated at a high speed, so that the appearance or shape of the workpiece surface changes. Due to the impact and cutting effect of the abrasive on the surface of the workpiece, the surface of the workpiece can obtain a certain degree of cleanliness and different roughness, so that the mechanical properties of the workpiece surface are improved, so the fatigue resistance of the workpiece is improved, and it and the coating are increased. The adhesion between them prolongs the durability of the coating film, and is also conducive to the leveling and decoration of the coating.

A dry coating process used primarily for metal finishes on industrial equipment. Powder coatings are applied as a dry powder by an electrostatic process and then cured by heat. It is known for offering high-quality finishes in terms of functionality and overall appearance. Powder-coated finishes are not only strong but flexible. It is suitable for both indoor and outdoor applications and is one of the most cost-effective finishing options.

Galvanized

Vacuum plating

water plating

blackened